AODK Electric Standing Desk with Drawers, 47 Inch Height Adjustable Small Gaming Desk with Power Outlets & LED Lights, Sit Stand Table with Monitor Stand for Home, Office, Workstation, Rustic Brown

I took a chance on the product and wasn't disappointed! Fairly good instructions that are concise and clear with good illustrations and some good "foreshadowing" tips/warnings for proper assembly. There was only one screw that gave me any frustration (naturally one of the last ones!) but the entire assembly was pretty easy, and took a little over an hour by myself. The supports, frame, and motor are heavy, made of solid materials, and seem more durable than I expected. The motor is SUPER quiet. One minor downside is that the primary desk area is made up of 2 pieces, so there's a very minor crease about 2" in front of the riser (there's just shy of 12" of solid desk from the front edge, so there's plenty of flat are to work on), but it's not obtrusive and the way everything fits together it's reinforced and very strong. There's only a tiny wobble at the higher settings, but thats expected. The fabric drawers are the least appealing part, as they're not designed to hold much weight (like normal office junk) and will likely be easy to wear out or break if you over load them or spill liquids, but they'll do nicely for notebooks, cables, and some basic supplies. I bought this model in part because of the specific open space behind the drawers which provides a built-in cable management area. There's a small 12" shelf in the center that holds a power strip - it would've been nicer if that was a little bit longer across the back, but it's more than enough for an 8-10 outlet power strip. Most other variable height desks either have nothing, or a basket mounted underneath... which may work for you, but I was looking to be able to access the cables from the back of the desk since it's not up against a wall on that side. The other features like the power strip and LED light strip under the riser shelf are nice touches. I probably won't use the lights that much, but I can see how this could add a lot of flare and ambiance for some people. The height adjustment range is fantastic. I'm 6'3" and at the highest setting, it's way too tall for general use - with the work surface sitting right at 48" high. At the lowest setting, the work surface sits at 31" (with 25.5" of legroom clearance underneath) and is perfect for my existing chair and setup, which may be a little high for smaller people, but is absolutely ideal for taller folks like me. So far I'm very pleased and would certainly recommend the product as of now. More than reasonable quality at a decent price for the overall value ($270 as of July 2024). If the motor holds up over time, it's definitely worth it, but I'll update this review if that happens.

Got this on sale and holy smokes what a cool desk. Honestly blown away by what you get for the price its really well done. Some people were saying the joining dowels were weak but they must have stepped on the top or something. They join two of the panels together. It IS particle board but the frame of the desk is so well done that it is mainly just a surface panel you need. Some people crank down on them too hard but really whit how the desk is built (well) the top boards just need to fastened to the frame to hold them in place. Pros: -Incredible value for the money. -Well-built design and pretty easy to assemble. -Good instructions. -Has the three drawers which are great. -Has a cool light bar with brightness, modes and RGB colors. -Cable / power strip tray is just over 12" so will suit many power strips. -Just a really cool desk for the price! Cons: -The RGB light bar will use one of the two USB ports on the desk strip (get around with power strip that has a USB port and get a USB extension to power the light bar). -The cloth drawers could maybe use something at the back bar point as they get hung up from the weight of what you put in the drawer. It has to be tilted upwards to get the drawer to sit flush like it should. Minor thing. -You can crack the tabletop boards if you crank down on the fasteners, maybe they could make more of a point you don't need to super tighten the fasteners for the desktop because it is just holding it to the top of the frame, which is sturdy. -You probably didn't see this desk before getting the last one you bought so you can't justify getting this one, yet...

I absolutely love, love, love this desk!! I was nervous putting it together, but pulled up my big girl panties and read thru the excellent instruction booklet, taking time to make sure it was done properly the first time as it says clearly that if you don't do a step correctly, later steps will not go together correctly and I wanted to prevent that. I was so happy when it all came together, plugged it in and everything was just perfect! Extra parts came so no worries there. Excellent height adjustments and value for the money. There's so little noise that it won't interfere while on work calls, The screw holes all lined up properly. Also, the seller's communications during the shipping were helpful, and reassuring, above and beyond. Thank you, thank you, thank you! I never want a different desk again! This is perfect!

This seems like a nice desk that will work well for sitting, standing, and with my small treadmill. It took a while to put together, but was easy to do. The main negative so far was that one of the main desk panels arrived with a large ding in it that looks bad at the front of the desk.

This is an amazing standing desk. It has a lot of space and is incredibly sturdy. If you are looking for a great standing desk, I would advise this one. The assembly time is a bit longer than expected as there are a lot of parts. But having the ability to stand while working is worth it. The dusk is very quiet as it is moving, and I have had no issues with it thus far.

Great desk, well worth the price! The box was a little damaged in shipping but it was so well packaged that it didn’t hurt the product. Assembly was straightforward, I did it by myself over about an hour and a half I think. It’s for my husband who is 6’ 5” and the tallest height is perfect for him to stand at. Controls are easy. Drawers are fabric so they’re not the strongest but that’s fine. It looks great and the motor is quiet.