Repair Large Pool Liners

Small leak where the wall meets the floor. Easy to apply and you'd never know it was there. No leak!

I ordered a different kit that had the same chemical in it but the patches were only like 4" in diameter, and they were solid blue, my pool has the blue squares. Its an above ground 30 foot by 18 foot intex seasonal pool. During the winter we had an animal eat through two layers making 2 rather large open holes in the liner. it was a very expensive pool so I didn't want to have to replace it. When the first kit didn't cover, I ordered this one, not only were the patches big enough to cover the holes and then some, there were more than I needed. I patched the inside and outside even though it doesn't say you have to. We patched it while it was dry, (make sure you round the edges as they were the only thing that didn't adhere) waited the full 24 hours for full adhesion, and we have no leaks while filling the pool.I did order the rush shipping on these and amazon didn't recognize the shipping method so the tracking was wrong and I received them a day later than advertised, not a week later like amazon updated the date to.love that although the pattern isn't perfectly aligned because of needing to use the full patch to be sure of coverage, it still matches the pattern and when the pool is full you can't tell it's patched!

Nothings perfect, but this was close.

I was skeptical if this was going to work. I loosely followed the instructions since heat was a factor. Once I put the patch on it was there. So be sure you get it where you want it the first time. If it is dry clean the surface first. Then take a pen and mark where you want the patch to be, once you stick it, a second chance is not going to happen.My one con to this, The glue is just enough to coat the patches. It really needs to be 30% more. So you may want to order a second tube of glue to have for those smaller wholes so you don’t have to wait.

The part of the patch above the water line stuck very well. The part under the water didn’t stick at all

We had a few problems getting our pool up, so there was a period that it laid open, empty on the ground & unfortunately, a huge limb fell puncturing the bottom of the pool. I can't find my pic of before putting patch on but the hole wasn't much smaller than the patch you see above. We filled it up and kept watching it for leaks. So far so good so up to this moment, I'm a very pleased customer.

At first there was a half inch slit hole in my 15ft diameter metal pole pool. With it drained at the beginning of the season I followed the instructions and even used weights to hold down the patch. This worked well even though the hile was near a seam. Once I started filling the pool it was pointed out there was a pin hole near the bottom which really had me worried. With help trying to find the hole and preparing the path I was able to dive to the bottom with goggles and patch it under water. I was really nervous about this but a month later and it still seems good..... very satisfied since it did work on 2 holes and still have plenty of glue and patch left.

Doesn’t even stick in the slightest. Totally useless