Meguiar's M205 Mirror Glaze Ultra Finishing Polish, Easy-to-Use Formula for Impeccable Shine, Multiple Ways to Apply Mirror Glaze, Removes Defects and Swirls for a High Gloss, 8 Oz Container

Late to the game in reviewing this product, but it is one of the best ones from Meguiar's It is a mild polish, but will remove very noticeable marks from even harder paint surfaces. It excels at removing swirl/hologram polisher marks after compounding or working with other less precise polish products or methods. I routinely finish my polishing with this product and my rotary machine, going directly to wax or sealant and leaving no holograms or polisher marks. It is not a "filler" product that rinses out after a rain or a wash-the clearly polished look is honest and will remain with proper care. Others have mentioned and I will repeat: keep your pad flat on the work surface when using this product and you will get great results. One difference with this product is that it slings barely any dust or bits of material when running it properly. It doesn't go dry. Conversely, this does mean cleaning the pad is different. Have a terry or microfiber towel handy to wipe the pad clear of excess product and old paint material. In general, I find I have to do this once per panel rather than waiting longer. Different than diminishing abrasive products and ones that go dry eventually, running a brush over the pad containing this product does not really help clean it. The only issue I had when first using the product was on softer paints. I spoke with Meguiar's reps and an independent retailer with extensive experience using M205 and they confirmed that this was developed with modern, generally harder paints in mind. With softer paints (I work on quite a few old enamel and lacquer finishes), cutting the work time, speed, and pad pressure makes the product work its best. As was explained to me, the microscopic shape of the abrasives in M205 tends to work very quickly and if you run it too long, that abrasive can go too far and cause marring Also, keep the pad clean! Since the abrasives don't break down, they hold onto old paint material which can build and cause marring as well. There is a bit of a learning curve if you are used to the routine of diminishing abrasive products from Meguiar's and others. I use this product primarily with a rotary machine, though I have used it with my DA machines and in spots by hand as well.

Easy to apply. Leaves a nice slick shine.

This polish works great, I only performed a light polish with it & saw a tremendous difference primarily in the oxidation removal, and water spot removal etched into the clear coat. Though one panel of water spots didn’t come out, I was using a pretty soft pad to be fair. Also light scratches that can’t be picked up by the fingernail do come out. Application is easy & straight forward. Only took me a couple hours.

This worked great on my car. Took 15 minutes and my car is so shiny!

Great product. I only use meguires products, bit make sure u wipe it off good because if it dries its hard to get off

This product does amazing on car paint..I use it on models that are customized..it makes their paint job look realistic..I use enamel and lacquer paint do polishing must be done..

Polish is great for UV epoxy on pool cues

After the deep polish with another compound, this one finished the job with an amazing shine. Highly recommend it.

Good

J'ai approvisionné ce produit sur les conseils d'un professionnel et pour un usage détournée. Polish d'entretien d'une coque d voilier. Le 205 est peu agressif et comme tous les produits meguiars on peut être sur d'un résultat impeccable.

Excelente producto cumple lo que anuncia, el brillo es notable lo recomiendo

Muy bien

Safe go to for finishing polish