Straight Router Bits Set

The items are packaged nicely

Work great till they start breaking

These are amazing bits and at a great price. I used these in my Shaper Origin and obtained sharp, accurate cuts. They are strong enough to plunge-cut into wood but take shallow cuts to avoid tear-out. I primarily used these bits to cut patterns out of 1/16" copper plate (thicker material than it sounds). I pre-drilled an entry hole for the bits and cut the copper at full depth on a single pass. Maintain a slow but steady feed rate; even the tiniest bit in the set will manage the job.

Using these on an X-carve These work excellently, and I have run the machine now for ~8 hours of active milling with no signs of wear on the 1mm bit. Words of advise on run speed. All steps below assume default machine settings for Pass Depth The 1.5mm+ bits can handle 15inch/min XY feed rate on HDPE. I have found that 12inch/min is the ceiling on the 1mm bit, again on HDPE. On Oak, I have found no need to lower XY Feed Rate for the 1mm bit. The default setting of 28 in/min worked without any bit damage.

Use them on my CNC table to cut wood and they do a great clean accurate job. Absolutely worth it and I'll buy more when these wear out. Was using the 1mm on some birch ply, walnut, and oak and they cut through like butter leaving a finished surface that required zero sanding. Very happy with the results. Better than purchasing a separate large format CO2 laser when some cuts and pockets are required and just as fast if not faster.

Excellent cutting of grove or deepening s grove...

These are not forgiving, and do cause tearout. You get what you pay for I guess. Not my favorite, but with a bit of cleanup after using them they worked.

Cheap, get what you pay for. If i could give half a star, I would. Dulled them down to nothing on hard wood on the 1st use.

Las herramientas flexan un poco al mecanizar, utilizado para Contrachapado normal de 5 capas 15mm con makita Rt700 en CNC, velocidad alta y avance lento.

Ho acquistato queste punte da 3.175mm per la mia fresatrice CNC e ne sono rimasto davvero soddisfatto. La qualità costruttiva è eccellente, i tagli sono netti e precisi, anche su materiali come MDF e compensato. La durata sembra buona e il rapporto qualità-prezzo è eccezionale. Le consiglio vivamente a chi cerca punte affidabili per lavorazioni dettagliate.

sehr gute schneidkraft

fonctionne super sur défonceuse, bois exotique et ctbx, bonne qualité de fraises et livré rapidement

Fraises que j'achète régulièrement et de très bonne qualité, idéale pour la CNC, utilisée sur bois uniquement. Finition très propre.