LED Dimmer

Just finished installing to control a bunch of LED strip lights in my pantry cabinets. I've got a motion sending smart switch that feeds two HITLIGHTS 24V drivers. Each one leads to its own RGBZONE PWM dimmer for the two different zones of lights EMITEVER COB LED stripes). And so far, it's working great. I haven't installed the full array of lights yet, but results are excellent with what I've got. Very smooth dimming from off to full bright with no buzzing or flicker. The dimmer is a cheap little thing with a very industrial type of look (something I'd expect to find on a studio mixing board rather than, say, a modern kitchen wall. But it's perfect for its purpose in my case, and I expect it will do the job for years to come. Especially since I don't expect to be changing the dim settings of my pantry lights very often.

The RGBZONE Single Color LED Dimmer worked great! It transformed our 10 yr old Christmas tree that came with extremely bright LED lights. They are so bright they are annoying. We were going to buy a new tree this year simply because we couldn't stand the brightness any longer. My husband saw this dimmer and decided to try it. Well, it totally transformed our tree! We can now manipulate the level of brightness, and it works great. We can adjust it to whatever level we desire...Guess we'll be keeping this old tree a few more years.

This is 24 V. Make sure you’re buying what you need. I installed under cabinet strip LED lighting off of my 24 V solar installation. Using a 16 gauge wire I am able to illuminate 18 to 20 feet throughout my kitchen. (yeah I feel weird showing you my whole kitchen but it’s worth it). At this time I’m only using one side. It can control TWO 24V feeds independently and I do plan to carry this through into dining room lighting. I run 34 watts for this string of lights. I’m pretty sure I can run a few more 24 V light bulbs and stay under 60 W using both sides of this in the future. ***note*** I have loved this lighting since I put it in but I noticed because it was on my solar that my LifePo4 batteries can spike all the way over 30 V at spike charges and down to 25.6 at cutoff. This causes flicker when the batteries spike to 30 at full charge and then oscillate at their preferred 27 V. I found a voltage regulator. And that has worked pretty well. I don’t know if I can post links or if I should on Amazon but you can certainly search Amazon for a “24V DC regulator”. The unit I got provides a stable 24.4V. It improved and fixed all of the flickering with all of the lights that I’ve installed in the home. Quality. I would definitely buy this. This post was unpaid for, I am an enthusiast, I like to provide insightful reviews that hopefully help and inspire folks.

I used this to upgrade the dimmer on a LED lamp I already have. At low levels, I could see the PWM flicker on the original module (~measured at 380Hz). I bought the model with the 4 speed selector switch; 800Hz, I could still see slight LED flicker at lower levels, but at 2K and higher the light looks just fine for me. No audio LED artifacts from my lamp. I've knocked off one star from my rating for 2 reasons, one is that there is an internal RED power LED in the case, as I'm using this for a lamp control, this is mildly annoying. The other reason is I wish there was some sort of bias adjustment for the output range of the knob; 1/4 turn changes more than 50% of the range / brightness, so at very low light levels the knob feels very sensitive, it's hard to dial in low brightness easily, and rest 3/4 of the knob's range just effects the very brightness of the range.

This is a great little unit! Works on a outdoor LED driver that's supposed to be not dimmable. Does everything I want it to, it's perfect. LED driver is 60w, 12v, and lights are the most popular recessed deck lights on Amazon - which I could not use the provided power unit for as I ran together too many lights - thus the 60w purchase. Update: June, 2021 - so after less than a year, all of the sudden, my deck lights no longer fully power off. Interestingly, it still dims adequately, but will not turn off completely as it always has. I just ordered a replacement, it is a $12 unit after all, but if the next one fails within a short period, I'll be looking for an alternative solution. Knocked off 2 stars for the failure.

I replaced 22 feet of 5050 SMD LED strips with Lampsero COB LED Strip Lights and replaced my existing 12 volt driver with a single RGBZONE LED Light Strip Dimmer, and the RGBZONE dimmer works great with this configuration. Super-easy hookup to the dimmer, and the dimmer has minimal temperature rise while in use. Great product.

Having been through 3 sets lightbulbs before giving up on my ceiling fixture, 2 sets of tube lights, and then learning the basics about LEDs, PWM, electricity and how it all works, I arrived here. I wanted some good, bright, flicker free task lighting. So, I got a good strand of tape lights (Joylit 24v), a quality driver (NIYIPXL 200w) and a PWM Dimmer capable of frequencies above 3KHz. I probably didn't need that expensive of a driver, but the quality components in this one were reassuring. Wiring it all up couldn't have been easier, soldering couldn't have been harder (I'm terrible) but it all came together. The clip attached is my iPhone recording at 240, this setup caught very visible flicker from Sylvania bulbs, mid range Philips bulbs, Barrina tube lighting etc. At low brightness, the slow motion video did capture some visual artifacts (low contrast vertical bars), but this is obviously way faster than even normal operation of my prior lighting as there was no flickering visible on video. Overall I'd definitely recommend this for the price, at least at 8KHz with 16ft of 439lm/ft strip lights.

Very frustrated with this dimmer. I bought several for my DIY solar landscape lighting project. One circuit that has 10 3.5W lights is too bright and I wanted to dim it a little. The first of these burned out in about one year, shorting my whole circuit. I installed a new one, now with a circuit breaker. After three months I see it doing nothing, the circuit works as if there's no dimmer. It worked when I installed it. It is rated 25A, and these lights consume barely 5A, not sure what is the deal. I think in reality it can handle only a few amps, as some other reviews point out. Beware. It is frustrating because there are very few of different 12V dimmers with this connection set up available, not much to choose from. Will not buy this dimmer again.

Very easy to use and install

Our Neon LED strip light on the handrail was too bright. We're using this dimer to reduce brightness to around 25%. It works great, so far.

Flicker free operation for led strip lighting. Ordered second one for another job. Two months tested so far with no issues.

It dosnt have a remote controller, and im not sure what "Sheerness" means

Fairly easy install. Looks kind of cool. A lot of subtlety in dimming. would buy again.